Stock Clearance: TWA Clear Water Repellant - 2 Lite Bundle of 6. Big Savings - 47% Off. Free Delivery.

Preschem Brown Stain

$29.00$305.00 (Inclusive of GST)

Preschem Brown Stain

$29.00$305.00 (Inclusive of GST)

Preschem BROWN STAIN is made with the same technology as AUSSIE CLEAR, so it’s designed for external Australian conditions. It is the ideal product to use on light to mid-toned timber like Blackbutt or even Cypress Pine, where you wish to darken the colour to a pleasing “Spotted Gum” brown, but still, retain a natural unsealed look. BROWN STAIN repels and controls moisture, increasing it’s stability and contains a mouldicide to help prevent unsightly sap stain mould. Brown Stain is a true penetrative oil product so it will never crack and peel.
Clear
SKU: RADIAL SEALER-1-1 Category:

Recommended Uses

PRESCHEM BROWN STAIN can be used wherever an opaque protective exterior finish is required. The PRESCHEM BROWN STAIN has colours that blend well with the outdoors. Some typical applications are decking stain, fencing, cladding, fascia, exterior doors, window frames, exposed beams or any other timber where a wood stain is desired. We recommend sampling the colour on a small section of timber or off-cut prior to full application.

Directions For Use

Stir well before use. Ensure a clean dry surface, free from dirt, grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a wood cleaner such as Preschem GREY DECK CLEANER. Stir the measured dose of the PRESCHEM BROWN STAIN tinter pack into the correctly sized can of AUSSIE CLEAR thoroughly before use. PRESCHEM BROWN STAIN can be applied by any convenient means, such as brush, roller, spray or dip application, however, decks and large areas are most easily applied with a lambswool applicator. On dressed timber, the strength of the stain colour can be controlled somewhat by application quantity, and wiping will make the colour more transparent. Any excess stain on the timber 1-2 hours after application should be wiped off. If the timber still looks dry, another application may be required. Allow 24 hours for thorough drying.

Restoration

If the timber looks dry or the colour has faded simply reapply another coat. Sanding and cleaning of the surface are recommended prior to this application. Some high weather areas may need regular inspections and reapplications every few years.

Coverage

Approximately 7-8 m2/litre on rough sawn timber and 11-12 m2/litre on dressed timber. Often, stains will be stronger in colour on rough sawn timber.

Cleaning

Cleanup in Mineral turpentine.

Packaging

Brown Stain tinter pack – Available in 200 mL (for 4Lt Can), 1Lt (for 20 Lt Cans) tinter packs.

Safety Instructions

Avoid skin contact by wearing protective clothing. Don’t breathe vapour or spray mist.

First Aid Instructions

If poisoning occurs contact a doctor or Poisons Information Centre (Phone 131 126)

Eyes
Hold eyes open, flood with water for at least 15 minutes – see a doctor.

Skin
Remove contaminated clothing and wash skin thoroughly with water.

Inhalation
Remove to fresh air.

If Swallowed
Do not induce vomiting. Give a glass of water and transport to the hospital.

Additional information

Size

1 LITRE, 10 LITRE, 20 LITRE

Reviews

There are no reviews yet.

Be the first to review “Preschem Brown Stain”

Your email address will not be published. Required fields are marked *