RADIAL TIMBER SEALER is designed to be a one-off initial precoat for new hardwood and is recommended to be applied to all sides. It is suitable for hardwoods used for external cladding, window frames, fences, decking and pergolas. If preferred, the surface can be recoated with an oil-based finish after installation if the freshly cut appearance is required.
Ensure a clean dry surface, free from dirt, grease and wax. Greyed timber should first be cleaned with a suitable wood cleaner such as Grey deck cleaner. Brush spray or wipe one generous coat of RADIAL TIMBER SEALER on to the timber and allow 24 hours drying time. It can be applied by any convenient means, such as brush, roller, spray or dip application. Exterior floors or decks can be easily treated with a lamb’s wool applicator. If the timber still looks dry, another application may be required. A minimum of 24 hours of drying time for decking and areas subject to foot traffic is advisable. Ensure all end grain wood is well coated to minimize water absorption.
RADIAL TIMBER SEALER will remain water repellent for up to 12 months on fully exposed timber in most conditions. It is designed to a true one time only application on new timber. Note that it will lose water repellency over time. However, if the customer wishes to maintain water repellency while retaining the natural silver-grey weathered look, then it is recommended that Preschem’s WEATHER REPELLANT is used.
|Dressed||9-11 m2/litre||11-12 m2/litre|
|Rough Sawn||7-8 m2/litre||8-9 m2/litre|
4, 10 and 20-litre cans.
Avoid skin contact by wearing protective clothing. Don’t breathe vapour of spray mist.
If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).
Hold eyes open, flood with water for at least 15 minutes – see a doctor.
Remove contaminated clothing and wash skin thoroughly with soapy water.
Remove to fresh air.
DO NOT induce vomiting. Give a glass of water to drink and transport to the hospital.
4 LITRE, 10 LITRE, 20 LITRE, 200LITRE