Aussie Clear Decking Oil
AUSSIE CLEAR is an exterior decking oil and timber finish that protects the hardwoods from the weather. It is the best oil based finish to highlight the natural grain and beauty. This results in a completely natural oiled look.
AUSSIE CLEAR stabilises timber as it repels moisture, reducing cracking or splitting. No film is allowed to form, so peeling or cracking is never a problem. It also inhibits unsightly mould growth with its powerful moldicide. It has been specially formulated and tinted to use on a broad range of hardwoods.
For over 30 years Australians have used AUSSIE CLEAR for their decking oil.
Coverage
Couldn't load pickup availability
Pickup available at Timber-Care Dandenong South
Usually ready in 2 hoursPairs well with
Aussie Clear Decking Oil
Before & After with Grey Deck Cleaner & Aussie Clear
Product details
Recommended Uses of Aussie Clear
AUSSIE CLEAR can be used wherever a clear oil-based exterior finish is required. This includes exterior decking, fencing, pergolas, weatherboards, window frames, furniture, cladding or facia. Timber finishes/decking oil such as AUSSIE CLEAR are suitable for all popular timber including Cedar, Merbau, Jarrah, Cypress Pine, Spotted Gum etc. It has been formulated with its own “transparent” pigment to appear clear on darker hardwood timbers.
Which product to use for darker and lighter timber?
AUSSIE CLEAR is recommended for mid to dark toned hardwoods such as Merbau, Spotted Gum. AUSSIE CLEAR LIGHT is for the blond to mid-toned timber such as Blackbutt, Silvertop Ash, and Cypress Pine.
Apply AUSSIE CLEAR dry surfaces, free from dirt grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a wood cleaner such as Grey deck cleaner It can be applied by any convenient means, such as brush, roller, spray or dip application, however, floors & decks are most easily applied with a lambswool applicator. Apply one coat of AUSSIE CLEAR, working it into the timber. Any excess oil, remaining on the surface after one hour should be wiped off. If the timber still looks dry, another application may be required. Allow 24 hours for thorough drying.
Coverage
Sawn approx 8-9 m2/Litre.
Dressed approx 11-12 m2/Litre
Maintenance
Timber treated with carefully formulated wood finishes such as the AUSSIE CLEAR decking oil will not blacken when maintained regularly. However, over time and depending on the severity of exposure, the rich colour of the timber will fade. Repeat applications are simple as the timber can be re-oiled to bring back the rich natural timber texture.
Packaging
1, 4, 10, 20-litre cans and 200-litre drum.
Safety Instructions
Avoid skin contact by wearing protective clothing. Don’t breathe vapour of spray mist.
First Aid Instructions
If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).
EyesHold eyes open, flood with water for at least 15 minutes – see a doctor.
SkinRemove contaminated clothing and wash skin thoroughly with soapy water.
InhalationRemove to fresh air.
If SwallowedDO NOT induce vomiting. Give a glass of water to drink and transport to the hospital
Aussie Clear Decking Oil
A customer's video on their deck rejuvenation project
Aussie Clear Decking Oils FAQs
Aussie Clear is a premium decking oil specifically designed for Australia’s harsh outdoor conditions. It offers deep penetration, UV protection, water repellent and Dirt & mold resistant.
How long does Aussie Clear last once applied?
Aussie Clear typically provides 12–18 months of protection, depending on exposure to weather, foot traffic, and timber type. Recoating is recommended annually for high-traffic or exposed areas.
Do I need to sand my deck before using Aussie Clear?
No sanding is required if the timber is in good condition. A thorough clean with a Grey Deck Cleaner cleaner is usually enough. Remove any peeling coatings or grey timber for best results.
Is Aussie Clear water-based or oil-based?
Aussie Clear is an oil-based decking treatment. It penetrates deep into the timber for long-lasting protection with no peeling or cracking with natural finish that highlights the grain.
Is Aussie Clear suitable for all types of timber?
Yes, Aussie Clear works on most hardwoods and softwoods, including Merbau, Spotted Gum, Blackbutt, Silvertop Ash Ironbark Jarrah, Pine, and more. For oily hardwoods, allow the timber to weather slightly before application.
What’s the drying time after application?
Aussie Clear is touch-dry within 4–6 hours and fully cured in 24 hours, depending on temperature and humidity.