Product details

Directions For Use

Timber to be treated should be dry and clean. Any old paint, stain or surface moulds should be removed before application. Recommended application method is by flood brushing, direct injection into affected areas or where convenient total dip or immersion for one or two minutes. For surface treatments the required absorption of CWP is 0.25 litres per square metre (1 litre per 4 square metres) One application may be sufficient in most cases. Allow at least 24 hours before a second application if it is required. Coverage will vary from approximately 4 to 8square metres per litre depending on the timber species, moisture content, and surface condition. It is important that all surfaces are coated to ensure effective protection. All cutting, drilling, machining or planning should be done before treatment. Timber components should be treated before joining or fixing.

Protect and stain a deck

Clear Wood Preservative to protect the deck from termites before applying a timber oil.

All rounder oil for indoors & outside
We’re looking for stars!
Let us know what you think