Walnut Timber Finish
WALNUT TIMBER FINISH is our new dark look in the AUSSIE TIMBER FINISH range. It contains oils and water repellents to provide timber nourishment plus a colour stain which also provides excellent UV protection. WALNUT TIMBER FINISH stabilises timber and repels moisture, reducing checking and splitting. When applied correctly, no film is allowed to form, so peeling and cracking is never a problem. Unsightly mould growth is inhibited by a powerful mouldicide. WALNUT TIMBER FINISH is designed for all hardwoods and softwoods. It has become the go to finish on pine timber – turning the light pine to a darker more expensive woody look.
Coverage
Sawn approx 8- m2/Litre.
Dressed approx 11-m2/Litr
Couldn't load pickup availability
Pickup available at Timber-Care Dandenong South
Usually ready in 2 hoursPairs well with
Walnut Timber Finish
Product details
Recommended Uses of Walnut Timber Finish
WALNUT TIMBER FINISH is a new addition to the AUSSIE CLEAR range and can be used wherever a non-transparent protective exterior stain is required. WALNUT TIMBER FINISH will turn blond timbers into a pleasing walnut brown colour, while enriching and deepening mid to dark toned wood. Suitable applications are: Decks, cladding, fencing, fascia, exterior doors, window frames or furniture that are fully exposed to the weather.
Directions for Use
Ensure a clean dry surface, free from grease, dirt and weathering. Apply GREY DECK CLEANER to weathered timber to prepare it. Badly weathered timber may require a light sand beforehand. If a paint or varnish has been previously applied, sand back the clean bare timber first.
Stir Well Before use as pigments may settle. Apply with a lambswool applicator, brush, roller or spray. On dressed timber, you can control the depth of colour some what by the amount applied. Wiping the timber after woods will lighten it. Any excess WALNUT TIMBER FINISH that hasn’t been absorbed after 1-2 hours needs to be wiped off to prevent it forming a film. If another application is required, then apply after 24 hours and allow 24 hours drying before use.
HANDY TIP – For best results do not apply late in the day when overnight condensation or if rain is expected within 24 hours.
Coverage
Sawn approx 8- m2/Litre.
Dressed approx 11-m2/Lit
Packaging
1, 4, 10, 20-litre cans and 200-litre drum.
Safety Instructions
Avoid skin contact by wearing protective clothing. Don’t breathe vapour of spray mist.
First Aid Instructions
If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).
EyesHold eyes open, flood with water for at least 15 minutes – see a doctor.
SkinRemove contaminated clothing and wash skin thoroughly with soapy water.
InhalationRemove to fresh air.
If SwallowedDO NOT induce vomiting. Give a glass of water to drink and transport to the hospital