D-Mould
D-Mould is a powerful, water-based mouldicide that is environmentally safe. It has been designed to protect and clean most exterior surfaces from unsightly mould and algae growth that is the cause of blackening, discolouration and slipperiness of these surfaces. D-Mould contains the active mouldicide and algaecide alkyl dimethyl benozylammonium chloride.
Coverage
6-8 square metres per litre.
Couldn't load pickup availability
Pickup available at Timber-Care Dandenong South
Usually ready in 2 hoursPairs well with
D-Mould
Product details
Directions For Use
Mix the 500 ml of D-Mould concentrate into 10 litres of water. Brush, roll, spray or mop a generous application onto the surface to be treated. Scrub the mould/algae affect surface using a nylon brush or stiff broom. Once applied, D-Mould kills any existing mould and natural weathering removes discolouration over a period of time. Heavily infested surfaces may require re-treatment with D-Mould 3-6 months after initial application. If treating blackened or mould affected wood, pretreatment by scrubbing discoloured surfaces with a household bleach or oxalic acid will help to clean it instantly. Rinse the bleached area with plenty of clean water and allow to dry. Apply D-Mould to prevent any further infestation of mould. Re-application of D-Mould every 1-2 years may be necessary to prevent re-occurrence of mould.
Recommended Uses
D-Mould is uniquely formulated so that when it is applied to raw timber, the treated surface weathers to a silky appearance. It is ideal to protect and clean timber, especially Western Red Cedar. Untreated surfaces such as decks can become slippery and dangerous due to mould growth. D-Mould will clean and protect these surfaces from mould growth. D-Mould is also suitable for other external surfaces e.g. paving, brickwork, tiles, painted surfaces, synthetic grass and canvas.
Restrictions
Test D-Mould on a small area of the surface to be treated, to ensure it has no adverse effect on paintwork, etc.
Coverage
5-10 square meters per litre-depending on surface porosity.
Compatibility
Clean applicators thoroughly with water.
First Aid Instructions
If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).
EyesHold eyes open, flood with water for at least 15 minutes – see a doctor.
SkinRemove contaminated clothing and wash skin thoroughly with soapy water.
InhalationRemove to fresh air.
If SwallowedDO NOT induce vomiting. Give a glass of water to drink and transport to the hospital
Timber Preserver
Timber Preserver gives timber protection against fungal degrade and species of
woodborers. For use in areas such as deck subframes, crossarms, timber
fencing, sleepers, bearers, timber joints of all kinds and situations
where damp conditions could promote decay or other biological attack.