No Rot Rods

APVMA approved

Tested in Australian conditions and approved for commercial and domestic use. Learn more about APVMA approved

Recommended Uses

NO ROT Rods can be used as a timber treatment for all outdoor timber structures which are exposed to weather or the ingress of moisture is an issue. Typical uses are to treat pergolas, timber decks, steps, fence posts and railing, window frames, etc.  It can also be used as an internal timber treatment where it’s subjected to persistent moisture, such as in bathroom wall cavities.

Timber which has existing decay can also be treated with NO-ROT, to sterilise the timber and prevent further attack. All timber species can be treated. NO-ROT will only be activated in the timber with a moisture content greater than 20%. Timber treated in this situation will also resist termite attack.

Directions For Use

Drill one or two 9 mm (3/8 inch) hole 40 mm (1 3/4 inch) into the timber at the position where decay commonly occurs. Insert one NO-ROT into each hole and seal holes with the wooden dowels supplied.

Under normal conditions the sticks should be replaced every 5-10 years.

Technical Data

Storage and shelf Life

Use synthetic rubber (PVC) gloves when handling NO-ROT. May irritate the nose and throat. Avoid contact with eyes and skin. Do not inhale dust. Wash hands after use. For more information download the SDS

Safety Instructions

Use synthetic rubber (PVC) gloves when handling NO-ROT. May irritate the nose and throat. Avoid contact with eyes and skin. Do not inhale dust. Wash hands after use. For more information download the SDS

First Aid Instructions

If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).
If swallowed drink water or milk. Seek immediate medical addention. If in eyes, hold eyes open flood with water for at least 15 minutes and see a Doctor.